Please can you please make other old doordarshan tv serials with a good video print available on internet to us such as Trishna (Pride & Prejudice, Kashish (serial of Sudesh Berry). Ujwala more on August 20th, 2010. Hi Abhi Thanks for creating this site. Could you please let me know where can I find old Karamchand. Kashish was a romantic TV show broadcast on Doordarshan in the 1990s. It starred Sudesh Berry and Malvika Tiwari as the male and female lead of the show. The story was written by Kamna Chandra. Sudesh Berry played the character of director Rahul Anand, who casts actress Mohana Kumar (Malvika Tiwari) in his film. Oct 3, 2015 - 3 min - Uploaded by Kashish ThakyalDoordarshan old ads and title songs of serial part 11 of 15 - Duration: 30:18. DURGA SHANKAR. Kashish serial on dd1. Romance Kashish was a romantic TV show broadcast on Doordarshan in early 90s. A well known director Rahul Anand casts new actress Mohana Kumar for his film. How their indifference changes to love was shown in the serial, which had 6 episodes. Dec 13, 2013. Kashish: Sudesh Beri and Malvika Tiwari played the lead roles in a short 6 episodes series Kashish, which struck a chord with the die-hard romantics of the 90's.

This qualification ensures that you are up-to-date with the latest industry regulation on wiring and the safe use and operation of electrical equipment and systems. It covers the 18th edition of the IET Wiring Regulations, which came into force in June 2008. These regulations are recognised by the British Standards Institute as a British Standard (BS7671). PLEASE NOTE: 2382-18 Level 3 Award in Requirements for Electrical Installations BS7671: 2018 is now available. This covers the 18th edition of the IET Wiring Regulations. Until January 2019, both the new 18th Edition (2382-18) and the old 17th Edition (2382-15) will be current documents. Registrations for 2382-15 will close on 31 December 2018 and certifications will close from 31 March 2019.

1. 16th /17th Edition Electrical Installation Standards

16th /17th Edition Electrical Installation Standards

This level will suit you if you are a practising electrician with specific qualifications, who needs to update your certification to meet the latest edition of the IEE Wiring Regulations. Alternatively, you're a newly qualified electrician who needs to gain this certificate. This course is available as a one-day refresher course or a full qualification. For the refresher course, you complete one core unit:. Requirements for electrical installations update to BS 7671: 2008.

For the full qualification you also complete one core unit:. Requirements for electrical installations to BS 7671: 2008. Level 3 Award in the Requirements for Electrical Installations BS 7671: 2008 (2015). Accreditation No: 601/5464/0 This is a reference number related to UK accreditation framework. Type: Credit based qualification This is categorisation to help define qualification attributes e.g. Type of assessment.

Credits: 4 Credits are a measure of the size of the qualification. Guided Learning Hours: 35 - 35 This is the average contact time a centre would typically commit. Total Qualification Time: 40 The total time for the qualification. Key Stage: Data unavailable This shows the equivalent Key Stage level.

Last Certification: This is the last date that a certificate can be issued. Here you can find all documents related to this suite of qualifications. By clicking on the section headings below, you can access a variety of documents such as the qualification handbooks and assessment materials, Statements of Purpose, and recognition letters from industry and employers. Some documents may be password protected. Passwords can be retrieved by logging in to and visiting the Administration section of the relevant qualification catalogue page. Interested in delivering this qualification? Find out more about or fill out our.

There have been requirements for safe electrical wiring as far back as 1876 and, in 1882, the Society of Telegraph Engineers and Electricians, later to become the Institution of Electrical Engineers (IEE – now part of the IET), published the ‘Rules and Regulations for the Prevention of Fire Risks arising from Electric Lighting’. This first incarnation of the IEE Wiring Regulations was just a simple four-page document. It was from these small beginnings that the idea of an inspection body with teeth to protect the general public from the dangers associated with electricity use was born. Up to1923, there was guidance in the form of the IEE Wiring Regulations (such as they were), but no guarantee that these were being followed, and no unanimity as to whether compulsion would be valuable. It was eventually decided that the most effective way of improving domestic wiring safety standards, and getting rid of unsound contractors, would be to form a voluntary body.

The National Register of Electrical Installation Contractors (NREIC) was the result, and its objectives were to enable the public to identify competent contractors, to improve the efficiency and status of contractors, and to establish a register of such contractors, although requirements were not strict. By 1929, the NREIC had a mere 202 contractors on its register, though this number did grow significantly and, by 1937, the new Electricity Supply Regulations gave suppliers the power to inspect electrical installations – now much more numerous - before connection to the public supply to ensure that they were safe, though the only statutory requirement was an insulation test. During the early 1950s, the electricity supply industry had begun taking increased interest in installation issues, even – at one stage – proposing replacing the IEE Wiring Regulations with a ‘Code of Minimum Wiring Practice’. This was opposed by contractors, the ECA, the British Electrical & Allied Manufacturers’ Association (BEAMA), BSI and the IEE, and the proposal was eventually dropped. The happy result was a proposal for a more effective inspection body – the NICEIC, which was eventually formed in 1956. Agreement had been reached some time before on the necessity for setting up the NICEIC, but difficulties of principle caused actual formation to take six long years.

The delay, however, had a major advantage in that the 13th Edition of the Wiring Regulations, introduced around 1955/56, was suitably worded for enforcement, together with non-mandatory recommendations for good practise. A decade later, in October 1966, E.J.

Sutton (NICEIC Director from 1966 – 71) talked about the forthcoming 14th Edition of the Wiring Regulations to A.S.E.E. To enable electrical contractors to learn about the new Regulations as early as possible, the NICEIC published a ‘Contractors’ Handbook’ about them. There was now huge discussion among contractors, the technical press, and the various bodies such as the NICEIC, about the forthcoming 14th Edition – and much controversy too. Sutton was busy on the topic, writing many articles on the effects of the 14th Edition. Modifications were announced in early 1969, and were analysed by the NICEIC. In February 1977, amid mounting concern over the forthcoming 15th Edition, NICEIC Chief Engineer Tom Howell helped put contractors’ fears at ease by saying that the forthcoming 15th Edition would ‘not lead to radical changes’.

This did not stop contractors’ worries. With the proposed launch of the 15th Edition in spring 1981 – more huge controversy ensued, with many articles, news and views being aired in the trade press. A major issue was that of mainland European influence, as the 15th Edition was based in layout on the IEC Wiring Regulations. The NICEIC, ECA and the then ECA of Scotland held a series of joint 15th Edition introductory meetings across the country. However, it was felt that there were still issues to be resolved, and the Council recommended in January 1981 that electrical installations should NOT be specified to the 15th Edition until the beginning of 1982.

The NICEIC, along with other bodies, held a series of seminars on the topic throughout September and October of 1981. A late 1981 edition of Electrical Times fretted that the 15th Edition was ‘beyond the ken of ordinary contractors’, so clearly, more education and clarifications were required. Yet, despite approval for the 15th Edition in 1982, the relevant Secretaries of State saw no difficulty in concurrent operation of the 14th and 15th Editions for a transitional period, until the end of 1984. Confusion reigned and, while ‘Megohm’ in Electrical Times claimed that the 15th Edition was a ‘green light for cowboys’, the NICEIC acceded to a request from the Secretaries of State for England and Scotland to delay implementation until January 1985. In the event, it was the question of how to accommodate the stringent IEC voltage requirements that delayed the 15th Edition for three years. 1983 Colin Kinloch’s (Technical Officer, later Assistant Director - Technical, then Director) long career at the NICEIC came to an end, as he retired, but not before airing his views before he went. Among other things, he commented that he still didn’t know just how many contractors were then working to the 15th Edition, but said ‘it forced people to think’.

Soon after, regarding the then forthcoming the 16th Edition, the NICEIC made an announcement concerning the electrical test instruments that Approved Contractors were required to have. However, the Council also announced at its AGM that is would amend its Memorandum of Association to include reference to standards of electrical installation safety and practice additional to the IEE Wiring Regulations. This would allow the National Inspection Board to invoke specific European and International standards as required. In December 1992, it was announced that implementation of the 16th Edition of the IEE Wiring Regulations would come into effect from 1st January 1993. The NICEIC provided its usual service, including meetings and publications, to Approved Contractors to ensure that they were a fully conversant with the implications of the new Edition as possible, prior to its implementation. Now that the 17th Edition of the IEE Wiring Regulations are planned to come into force in 2008, and the Draft for Public Comment (DPC) has been and gone, the UK electrical industry will have to wait to see what changes are finally published, but the rationale is mainly to do with harmonisation of the document with European standards.